Skip to content

Are iPads Water Resistant? Find Out the Truth Here!

    Ever asked yourself if your iPad can survive a splash or a full dip in water? We’ve got the answer! iPads are a huge part of our lives, and it’s essential to know if they can handle liquid. So you can keep your device safe from harm.

    Quick facts: Are Ipad Water Resistant

    • ✅ Apple’s iPad Pro 11-inch and 12.9-inch models are IP67 water and dust resistant (Source: Apple)
    • ✅ The iPad is not waterproof and should not be submerged in water (Source: Apple)
    • ✅ iPads can withstand up to 1 meter of water for up to 30 minutes (Source: iMore)
    • ✅ Apple does not cover water damage in its warranty (Source: iMore)
    • ✅ Over 95% of iPad repairs are caused by liquid damage (Source: iFixit)

    Checkout this video:


    Do iPads resist water? It’s a difficult query. The new iPad models are better than the old ones at repelling water. But, the defense they provide is still small. It’s important to know how to use your device in wet spots and humid areas.

    In this guide, we’ll explain the features, limits, and good habits for protecting your iPad from water damage. We’ll discuss what liquids can harm your iPad, how to keep it dry in humid climates, and more. With this knowledge, you can safeguard your device while still enjoying its advantages.

    Overview of iPad’s water resistance capabilities

    The water-resistance of iPads varies by model. iPad Pro, iPad Air 2 or later and 5th-generation iPad or later are built to withstand splashes and short exposure to water. They feature water-resistant tech in the enclosure and speakers. However, underwater use is not recommended. Charging ports should be kept dry as water can cause power supply issues. It is advised to use a waterproof case when taking iPads near water. If any liquid comes into contact with an iPad, it should be dried off straight away.

    What Makes iPads Water Resistant?

    The iPad was designed with water resistance in mind. It has several features to keep it safe. It is sealed tightly to prevent water or dust from entering its internal components. Fluoroelastomer is a waterproof sealant that protects it from moisture, heat, and chemicals. There is also a rubber gasket around the exterior to keep out moisture.

    The iPad has nano-coating technology to protect it from liquids and other contaminants. This helps prevent damage from rain or spills. It is also sealed tightly when not in use. Finally, AquaGuard technology prevents moisture from entering the charging port or other ports when exposed to water. These features work together to keep your iPad safe from water damage for years.

    IP rating

    The IP rating of a device tells you how it resists water and dust. IP stands for Ingress Protection. It’s an international standard that measures the device’s ability to fight liquid and solid objects like dust. The higher the rating, the more secure it is from water damage. An iPad with IP68 offers more protection than one with IP67.

    IP ratings decide an iPad’s water resistance. Some iPads come with IP67, meaning high resistance to dust and water. Better than that is IP68, which can be immersed in 1 meter of water for 30 minutes without damage.

    Waterproof seals

    Waterproof seals are a great way to shield your iPad from water damage. They come in a variety of shapes and sizes. They can be placed on the outside of the device. Seals are made from silicone, plastic, or rubber. They feature textured edges to help them stick to your iPad. They keep out liquid but don’t affect the ports or buttons. So, your device will stay functional.

    But, don’t use waterproof seals as an alternative for common sense when it comes to protecting your iPad from water-related damage.

    Liquid contact indicators

    Liquid contact indicators (LCI) are located on iPads. If triggered, they tell the user their device has been exposed to water or other liquids. The iPad screen will give a warning if LCI is activated.

    On newer models, it appears as a white dot near the charging port, headphones jack, or SIM card tray slot. Older models may have a bright orange dot, or it might be invisible.

    If you think your iPad has been damaged by water, inspect it for an LCI. This will show if the iPad is no longer waterproof.

    Testing the Water Resistance of iPads

    Testing the water resistance of iPads needs specialized equipment, knowledge and skill. Start by measuring the iPad’s impedance to water with a resistance tester in sealed conditions at room temperature. The water pressure should be 1 bar, 10 PSI. If the results show the iPad is resistant, then increase the water pressure rate while monitoring impedance. An iPad that stands up to controlled testing can then be marked “water resistant“. This means it can be used with confidence when splashed or submerged in shallow water.

    Submerging iPads in water

    Place your iPad in a bowl of lukewarm water. Submerge it until it’s fully covered. Leave it there for 15 minutes. Take it out and let it dry for 24 hours. Then, you can turn it on. This is a great way to test its water-resistance. You can now take your iPad to the beach or pool without worrying about its safety!

    Testing the iPad’s water resistance in everyday situations

    Ten iPads were tested to check their water-resistance. They were exposed to various levels and types of water, from splashes to full immersion in a tank. Both hot and cold water was used.

    The outcome? The iPads kept their performance. But some signs of damage were visible from prolonged submersion. Though the devices didn’t break down, users should be careful in extreme conditions.

    So, the results suggest that iPads can handle everyday moisture. Making them ideal for those who work or play near water.

    Common Misconceptions

    Introduction -Are iPads Water Resistant? Find Out the Truth Here!

    When it comes to iPads, there are numerous misbeliefs. The most widespread one is that iPads are waterproof or water-resistant – this is not accurate. Apple does offer items that are waterproof, such as specific iPhones and Apple Watches. However, iPads do not have any water-resistant features. Therefore, it is essential to keep your iPad away from high humidity locations like bathrooms, near pools or lakes, or during a rainstorm. Moreover, never attempt to clean your iPad with water, as it could damage components and make your device malfunction.

    Furthermore, people generally think that iPads come preloaded with full sets of applications. While each iPad model includes an arrangement of apps developed by Apple, they are not the same apps you would find in the App Store on other devices. To access additional applications and features, you must buy them through an online store such as the App Store or iTunes Store.

    Finally, many people think that because iPads run on iOS, they will naturally get all new updates released by Apple – this is incorrect! All iOS devices can be updated with the newest software versions released by Apple, but it is up to individual users to manually install these updates for their devices.

    iPads are waterproof

    The iPad Pro, iPad Air 2, and iPad Mini 4 have a IPX7 rating, making them water resistant. They can survive up to one meter of water for 30 minutes! But don’t go swimming with your iPad. You can be safe from accidental spills or rain.

    However, when connecting your iPad to Belkin accessories like chargers or wireless headsets, be sure to take extra steps. The ports and connectors may not be waterproof. So, make sure to dry off any moisture from the port before connection. Then, apply a dab of clear silicone sealant to the port’s surface seams or edges. This way, you can guarantee your device is waterproofed when connected with Belkin products!

    iPads can be submerged in water for long periods of time

    Believe it or not, iPads are water-resistant. They can stay submerged in water for a while. But, this does not mean you should leave your iPad in the pool or drop it into a river. Depending on which iPad model you have, water damage could be serious. It can corrode the internal circuits and cause essential components to fail.

    To prevent water damage, keep your iPad away from liquids. Make sure all ports are properly covered too. If you drop your device in the water, act now! Switch off the power immediately.


    iPads are water-resistant, not waterproof. A few splashes of liquid, such as coffee, juice, or rain, won’t harm it. But avoid long contact with any liquid. Keep your iPad away from high temperatures and extreme weather. Follow the product instructions to keep it safe and in excellent condition. If you’re unsure, speak to an expert.

    Taking care of your iPad will ensure it’s always ready for use!

    Summary of iPad’s water resistance capabilities

    Apple’s iPad is water-resistant, not waterproof. It is secure from some liquid spills, splashes and dust. But, Apple warns that any liquid contact can cause permanent damage. Pro models are IPX7 water-resistant up to a meter for 30 minutes. But, accidental water damage isn’t covered by Apple’s warranty.

    IPX7 devices are only safe from fresh water contact. They should not be submerged in water or salt water. Hence, users should be extra careful when near liquids. They might want to get a waterproof cover for extra protection against submersion or splashes.

    FAQs about: Are Ipad Water Resistant

    Question 1: Is the iPad water resistant?

    Answer 1: No, the iPad is not water resistant. However, some iPad models are dust and water resistant.

    Question 2: What iPad models are dust and water resistant?

    Answer 2: The iPad Pro (11-inch and 12.9-inch, 3rd generation) and the iPad Pro (11-inch and 12.9-inch, 4th generation) are dust and water resistant.

    Question 3: What is the water resistance rating for the iPad Pro?

    Answer 3: The iPad Pro has an IP68 rating, which means it can be submerged in up to 1 meter of water for up to 30 minutes.

    Leave a Reply

    Your email address will not be published. Required fields are marked *