Skip to content

How to Put Your iPad in DFU Mode for a Quick Fix

    Having a hard time with your iPad? DFU Mode is here to help! It can quickly and easily fix apps that are unresponsive, booting problems, and more. Put your iPad in DFU Mode and you’ll be back up and running in no time.

    Quick facts: How To Put Ipad In Dfu Mode

    • ✅ DFU Mode is the deepest recovery mode available on an iPad, allowing the user to update their operating system, restore their device and more – Apple Support
    • ✅ To enter DFU mode, the user needs to connect the iPad to a computer and launch the iTunes application – iFixIt
    • ✅ To put the iPad into DFU mode, the user must press and hold both the Home button and the Power button for 10 seconds simultaneously – iFixIt
    • ✅ After the 10 seconds have elapsed, the user must release the Power button, but continue to hold the Home button for 5 seconds – Apple Support
    • ✅ When the user holds both buttons down simultaneously, the iPad should display a black screen and be in DFU mode – Apple Support

    Checkout this video:


    DFU Mode is a must-know for your iPad. It lets you restore your device to its factory settings and repair any system issues. Here’s how to enter DFU Mode easily and quickly.

    1. Get the right tools.
    2. Carefully follow the steps.
    3. In a jiffy, your iPad will be restored to its original state!

    Let’s go!

    What is DFU Mode?

    DFU (Device Firmware Update) mode is a powerful way to repair software issues on the iPad. It lets you restore your device without deleting settings or data. To access it, press specific keys in a specific order. When in DFU mode, only boot loaders and core operating system processes will work. This is helpful for debugging and testing hardware and software.

    To exit DFU mode, use iTunes or Finder on Macs running macOS Catalina 10.15 or later.

    Preparing to Enter DFU Mode

    Entering DFU mode is key for fixing iPad issues. DFU stands for ‘Device Firmware Update’. It’s a low-level version of the normal ‘Restore & Update’ mode. It allows the device to connect with its firmware directly. This lets users perform a deeper repair without relying on Apple’s software.

    To enter DFU mode, start by holding down Home and Power buttons for 10 seconds. Then, plug in your device and open iTunes on your computer. It will show that iTunes has detected an iPad in recovery mode.

    Press Home and Power buttons again for 8 seconds. The screen should stay black. iTunes will then report it has detected an iPad in recovery mode. At this point, you’ve entered DFU mode. Now you can repair or restore your device.

    Connect your iPad to your Mac

    Connect your iPad to your Mac with a lightning-to-USB cable. Plug one end into the iPad and the other into the Mac’s USB port. When you try to access files from the iPad, select “Trust” from the pop-up menu. This will let your Mac recognize the device.

    Launch iTunes or Finder on your Mac. They should recognize the iPad. You’ll see two tabs in Finder—one for storage and one for settings.

    Then, you can put your iPad in DFU Mode.

    Download and install the latest version of iTunes

    To mirror your iPad to a TV, you need the latest version of iTunes. Open it and connect your iPad with a USB cord or Lightning cable. Wait for the devices to detect each other. Click the ‘Summary’ tab in the left-hand menu. Select ‘Enable screen sharing’ to activate the mirror function. Then launch AirPlay from your iPad. It will detect nearby devices with WiFi and you can stream what is displayed on your device’s screen.

    How to Enter DFU Mode

    Utilize the App Store-How to Put Your iPad in DFU Mode for a Quick Fix

    Device Firmware Update (DFU) mode is an Apple-specific solution. It helps when your iPad is not working correctly. DFU mode lets your iPad connect with iTunes on your computer to restore the device.

    To enter DFU mode, get the Lightning cable that came with the device. First, turn off the iPad. Then, press down both the Home and Power button. Keep the Home button pressed for 5 more seconds until iTunes recognizes the iPad in recovery mode.

    You’ll know you succeeded if a message pops up saying “iTunes has detected an iPad in Recovery Mode”. And, a window should appear that says “iPad in Recovery Mode has been detected”. This means you’ve entered DFU mode. Now, you can start restoring your iPad!

    Turn off your iPad

    Before entering DFU Mode, you must turn off your iPad. Press and hold the power button. When you see “Slide to Power Off“, slide the power icon to the right. It might take 3 tries before “Slide to Power Off” appears. Once you turn off your iPad, you’re ready to put it in DFU Mode.

    Press and hold the Home button and the Power button

    Put your iPad into Device Firmware Update (DFU) mode for a quick software fix. DFU mode skips the boot up sequence, letting you change the device’s firmware and restore it.

    To get into DFU mode on your iPad, press and hold both the Home and Power button for 10 secs. This will shut your device down and take it to recovery mode. You’ll see a black screen with an iTunes logo briefly on your device. This means it is in DFU mode. Connect to iTunes to restore or update your device’s firmware.

    Make sure to have a strong internet connection when doing this!

    Release the Power button but continue to hold the Home button

    To put your iPad into DFU mode, press and hold the Home and Power buttons. After 8 seconds, release the Power button but keep pressing the Home button. This will make your iPad enter DFU mode.

    Connect your iPad to iTunes or use iCloud’s Backup and Restore feature for troubleshooting. iCloud’s Backup and Restore feature lets you save photos, apps, music, messages, and contacts. Your important data is safe with this feature.

    After a few seconds, iTunes will detect your iPad in DFU Mode

    iTunes detects your iPad in DFU Mode. It shows a message that it’s in recovery mode. The prompt asks if you want to restore or update from an iCloud backup. Update is great if you have an issue with your iPad. It resets settings and preferences without manual backup or app deleting.

    When iTunes is done, your device should be back to normal.

    Troubleshooting Tips

    Troubleshooting can be the fastest way to fix minor iPad issues, without needing to turn it off or reset it. Try these tips:

    1. Toggle WiFi on and off.
    2. Charge the device.
    3. Hold the Home and Power button for 10 seconds to restart.
    4. Put iPad into DFU Mode. Turn it off and hold both the Home and Power buttons for 8 seconds, until a white screen appears. Then release them.

    If iTunes does not detect your iPad, try again

    If your iPad isn’t detected when you plug it into iTunes, try again. Check the connection between your computer and iPad, and that the cable is plugged into a power source. If it still isn’t working, disconnect your iPad and restart it and your computer. Then try again.

    If it still won’t work, put your iPad into DFU (Device Firmware Update) mode. This allows you to update the firmware without any help from the operating system. So press and hold the Home and Power buttons together for 10 seconds until the logo appears. Then release the Power button while holding down Home until iTunes detects your device in recovery mode.

    If you still can’t enter DFU Mode, try connecting your iPad to a different computer

    If you tried the steps and still can’t enter DFU mode on your iPad, plug it into a different computer. To check if an issue is caused by a faulty cable or computer hardware:

    1. Launch iTunes or Finder.
    2. Then, follow instructions for entering DFU mode.
    3. If this does not work, ask Apple Support for help.

    Note: This process won’t work on all iPads. Older models will require another way to enter DFU mode. Some models won’t be able to do this. Check your iPad model before attempting repairs or troubleshooting.


    DFU mode is a great way to take care of troubles with your iPad. It can restore it to its factory settings, cleaning out any software issues that may be causing it to run slow or crash. It does need some preparation and attention to detail.

    • Don’t disconnect the device from its computer during the process.
    • But, with a bit of patience, you’ll have your iPad running great again quickly!

    FAQs about: How To Put Ipad In Dfu Mode

    Q1: How do I put my iPad in DFU mode?

    A1: To put your iPad in DFU mode, first connect your device to your computer and launch iTunes. Then, press and hold the Home and Sleep/Wake buttons simultaneously for 10 seconds. Once the 10 seconds have passed, let go of the Sleep/Wake button and continue to hold the Home button for an additional 5 seconds. If done correctly, you should see a black screen on your device, indicating that it has entered DFU mode.

    Q2: What is DFU mode?

    A2: DFU mode stands for Device Firmware Update mode and it is a special state that allows you to update or restore your iOS device. This mode bypasses the normal boot sequence, which allows you to do things like update the firmware, downgrade the firmware, and even restore your device if it is having issues.

    Q3: What should I do if I can’t get my iPad into DFU mode?

    A3: If you are having trouble getting your iPad into DFU mode, make sure that you are pressing and holding the Home and Sleep/Wake buttons simultaneously for 10 seconds before letting go of the Sleep/Wake button. If you are still having trouble, try using another USB cable or a different computer. If you are still unsuccessful, you may need to take your device to an Apple Store for further assistance.

    Leave a Reply

    Your email address will not be published. Required fields are marked *