Stumped on how to switch the battery on your Samsung tab? Not to fear! This guide will teach you how to change the battery quickly and get your gadget working again. You’ll be ready to go in a jiffy!
Quick facts: How To Replace A Samsung Tablet Battery
✅ For most Samsung tablets, the battery is user-replaceable and can be found online (Source: Samsung Support)
Preparation
Before replacing your Samsung tablet’s battery, take safety precautions:
- Ventilate the area.
- Clear combustible materials.
- Disconnect the tablet from any power source.
- Remove the back panel.
- Make a mental note of where each wire is connected. Take pictures if needed.
Get familiar with parts related to battery replacement:
- Locate the external battery connector.
- Note the type of screwdriver needed for removing screws.
- Gather all necessary info.
- Ensure you have all necessary tools: Phillips screwdriver, spudger/pry bar tool, tweezers (optional).
- Get a replacement Samsung tablet battery of the same model.
Gather the necessary tools
Gather the tools needed to replace your Samsung tablet battery. You’ll need a screwdriver, battery replacement kit, and pliers. Work in a space with good ventilation, and don protective gear like gloves and glasses. Now it’s time to begin!
Shut down the tablet
To jailbreak a Samsung tablet, shut it down. Back up the whole tablet to secure your info and settings. Press the power button for a few seconds. The “Power Off” screen appears. Tap “Power Off” at the bottom. Wait for the device to turn off completely. Now you can start jailbreaking.
Follow the instructions in this article:
- Shut it down.
- Back up the whole tablet.
- Press the power button for a few seconds.
- Tap “Power Off” at the bottom.
- Wait for the device to turn off completely.
- Start jailbreaking.
Remove the back cover
To replace the battery in your Samsung tablet, the back cover must be removed. Make sure the device is turned off and unplugged. There may also be a service label that needs to be taken off.
Use a plastic opening tool or flathead screwdriver to loosen each of the screws along the edge. Slide or pry off the cover. The battery and other internal components will be seen.
Once the back cover is off, disconnect any cables between the old battery and other components. Replace it with a new one.
Disconnecting the Battery
To replace your Samsung tablet battery, disconnect the battery first! To do this, turn off the device and unplug from any power sources. Then, remove the rear cover to access the battery. Depending on the model, the cover may be held by screws or a clip. Be careful not to damage them.
Locate the yellow-colored battery connection cable. Undo its screws with a Phillips head screwdriver. Gently tug the cable until it comes out of its socket. Take out any adhesive that holds the battery. Finally, lift it out with both hands and set aside for disposal or recycling.
Locate and disconnect the battery cable
To find the battery cable on your Samsung tablet, start by taking off the covers on the back. Then, loosen the screws keeping the rear cover down. Depending on your model, you may need to remove more screws from the edges.
After all screws are removed, pick up the cover to see the internal parts, including the battery and its connections.
Locate the cable and pull it away from the connections on both ends. If it’s hard to take off, use tweezers or needle-nose pliers to help. Lastly, put all screws and other parts in a safe spot. You’ll need them to put your tablet back together.
Unscrew the screws holding the battery in place
To replace the battery in your Samsung tablet, you must disassemble it. Take off the back cover safely. Then, loosen the screws that hold down the battery. Be careful not to strip them. This can make reassembly difficult.
Once all the screws are out, lift up on the battery and remove it. Note any pre-installed widgets or components connected to the motherboard. These may be needed for reassembly, so make sure they’re not harmed during disassembly.
Remove the battery
Turn off and unplug your Samsung Tablet. Use a plastic opening tool to remove the rear panel. Inside, find and disconnect the battery connection cable. Take out the old battery carefully. Don’t harm the components.
Now insert the new battery. Reassemble everything. Done!
Installing the New Battery
Installing a new battery for your Samsung tablet is doable. First, switch it off and disconnect the power source. Use a small Phillips-head screwdriver to take out the screws at the back. Lift off the back casing. Now you can see where the battery is. Use a plastic opening tool if it is stuck.
Take out the old one and insert the new one. All contacts must be in the right spot. Put the screws back and power on your device. Test if it works!
Place the new battery in the slot
Before you begin, turn off and unplug your Samsung tablet from any power source. Then, find the battery compartment. It’s usually on the back or side of the device. Depending on the model, there may be screws to remove.
Once you spot it, put the new battery in and check that the connections are secure. If there are extra screws, make sure these are tight too.
Lastly, power up the Samsung tablet.
Reattach the battery cable
Once you’ve found the original battery and taken it out, the next step is to attach the battery cable to the new one. This can be tricky, so take your time and follow the instructions. Having a partner or friend to assist with aligning the screws, wires, or connectors can help.
The battery must be connected properly for the device to work well. If not, there may be too much resistance from the battery and it won’t charge or turn on. When the Samsung Tablet Battery is properly attached, power up and enjoy!
Secure the battery with the screws
Securing your battery is key when replacing your Samsung tablet’s battery. Once it is removed, you should see four screws around the compartment. Use a Phillips-head screwdriver to secure them back in place. This will make certain the new battery stays secure. Additionally, apply a bit of thermal paste between the new battery and its contact point for optimal performance and dependability.
Finishing Up
Once you’ve replaced your Samsung Tablet Battery, there is one final step to take – Finishing Up. This includes some simple steps to guarantee the battery is installed properly and ready for use.
- Reattach the cover of your tablet which was taken off during disassembly. Check all connectors are secure and the tablet is grounded.
- Plug in the tablet so the new battery begins charging.
- Start up your device and test it. If it appears to be working, you’ve successfully replaced the battery!
Now you can use your device with a functioning battery for years.
Reattach the back cover
To reattach the back cover of your Samsung Tablet, make sure all connectors are aligned and the battery is seated. Then, locate it and insert along the edges until it clicks into place. After that, turn your tablet on to check. If it works, you can now transfer photos with a USB cable or wirelessly via Bluetooth or Wi-Fi.
Before reattaching the back cover, use the right tool to tighten screws or bolts.
Start up the tablet
Before you replace your Samsung tablet battery, power it off completely. To do this, press and hold the power button for five seconds. If it doesn’t respond, press and hold the reset button for fifteen seconds.
- Disconnect all accessories like charger, mouse, keyboard, flash drive or headphones.
- Plug AC wall adapter into an appropriate outlet.
- Press and hold the reset button for ten to fifteen seconds until you see a startup menu on-screen.
- Select ‘Power On’ from the menu and your Samsung tablet will start up. Now you can replace your battery!
Test the new battery
Test out the new battery of your Samsung tablet. Start by connecting a USB cable to your tablet and the other end to either a computer or wall charger. Let it charge for an hour.
- Inspect the battery for any signs of damage, such as bulging or leaking fluids.
- Unplug and start your device.
- Check if it runs for at least four hours without any issues.
- Try out some new features or apps on your tablet to see how good its performance is with the new replacement battery.
FAQs about: How To Replace A Samsung Tablet Battery
Q1. What tools are necessary to replace a Samsung tablet battery?
A1. You will need a small Phillips head screwdriver, a spudger, and a plastic opening tool to remove the battery from a Samsung tablet.
Q2. How do I properly handle and store the old battery?
A2. Make sure to store the old battery in an area that is cool, dry, and away from direct sunlight. Additionally, avoid shorting the battery by touching its terminals with anything metal.
Q3. Do I need to wait for the battery to completely drain before replacing it?
A3. No, it is not necessary to completely drain the battery before replacing it. However, it is important to remember to power down your device before attempting to replace the battery.