Fed up with your Samsung tablet not starting? You’re not the only one! Don’t worry; this article will show you the steps needed. That way, you can get back to using your device quickly!
Quick facts: Why Is My Samsung Tablet Stuck On The Startup Screen
- ✅ One of the most common causes of a Samsung tablet stuck on the startup screen is a corrupt system cache – Source: Lifewire
- ✅ The most effective way to resolve this issue is to perform a factory reset – Source: Android Authority
- ✅ The user should back up any important data before they begin the reset process – Source: Samsung Support
- ✅ Sometimes, the tablet may be stuck in a boot loop due to a software update – Source: TechBuzz Ireland
- ✅ The Samsung tablet may also be stuck on the startup screen due to a hardware issue – Source: Tech Times
Checkout this video:
Basic Troubleshooting
Troubleshooting basics for your Samsung tablet when it’s stuck on the startup screen? No problem! Follow these steps for easy resolution!
- Start with restarting the device then move on to clearing the cache,
- resetting settings,
- or restoring from a backup.
If that doesn’t do the trick, then it’s time to contact customer support. It’s that easy!
Check the power source
Is your Samsung tablet stuck on the startup screen? Frustrating, right? If a hard reset didn’t work, check the power source. Ensure the adapter or wall charger is plugged in properly and the correct voltage is used. Also, try a different outlet and power source. Additionally, check the battery connections and make sure they are secured.
If these steps don’t help, it’s time to take your device to an authorized Samsung service center for testing and repair.
Check that the charging cable is securely connected
If a Samsung tablet is stuck on the startup screen, check if the charging cable is securely connected. If it’s loose, remove and reinsert it firmly. See if there are signs of physical damage on either end of the cable and replace if needed.
Also, check if other USB devices, such as hard drives or flash drives, are plugged in. Unplug them if necessary. This may help the tablet to boot correctly.
Check that the battery is charged
Check that your Samsung Tablet’s battery is charged. Plug the USB cable into the tablet and an electrical outlet if it isn’t. Attach one end of the USB cable to your computer. Insert the other end into one of your tablet’s USB ports. Turn on your tablet. Wait for it to detect the connection. Unlock your device. Now, you can safely connect the tablet to your computer.
Follow these steps to view or transfer data between devices:
- Plug the USB cable into the tablet and an electrical outlet if it isn’t.
- Attach one end of the USB cable to your computer.
- Insert the other end into one of your tablet’s USB ports.
- Turn on your tablet.
- Wait for it to detect the connection.
- Unlock your device.
- Now, you can safely connect the tablet to your computer.
- View or transfer data between devices.
Advanced Troubleshooting
Advanced Troubleshooting is when you try to find and fix more complex issues with tech. Say for example, a Samsung tablet is stuck on the startup screen – you would need to do advanced troubleshooting to figure out what is causing the problem and how to fix it.
The techniques used depend on the device. They involve collecting more information and running longer tests. You may need to contact tech support and even disassemble and replace parts. Doing advanced troubleshooting requires more skill and an understanding of tech than standard troubleshooting.
Boot into safe mode
If your Samsung tablet won’t boot, try booting into safe mode. To do this, power it off and hold down the volume down button while restarting. Keep holding until the Samsung logo appears, then let go. You should see safe mode onscreen.
In safe mode, 3rd party apps are disabled. This can help isolate what’s causing the issue. If an app is causing the problem, disabling it in safe mode should let you bypass it. Then, you can repair or uninstall the app. If that doesn’t work, try other troubleshooting methods like:
- Resetting
- Flashing a new version of Android OS
- Reflashing a backup image
Wipe the cache partition
Wiping your Samsung Tablet’s Cache Partition is a troubleshooting step for many issues. This partition has temporary system files which can become corrupted or outdated, causing failed installations, unexpected behavior, and app crashes.
To wipe the Cache Partition:
- Start your device in Recovery Mode. To do this, press and hold the Volume Up and Power Buttons simultaneously until the Samsung Logo appears.
- Select “Wipe Cache Partition” using the Volume Key and press the Power Button to confirm.
- Select “Reboot System Now” using the Volume Keys and press the Power Button to restart your device.
- After restarting, continue setting up your Tablet as a second monitor, following the steps offered in this guide.
Perform a factory reset
Your Samsung tablet may be stuck on the startup screen if there’s a software issue or third-party app. If troubleshooting doesn’t help, you need to do a factory reset. This will erase all your data, including apps and info.
To factory reset your Samsung tablet, press and hold the Volume Up and Volume Down buttons while you turn on the device. When you see the logo, release both buttons. Use the Volume Up button to highlight “Recovery Mode“. Select this option with either Volume button then Power. Then select Wipe Data/Factory Reset using either Volume button and confirm with Power. Finally, highlight “Yes—delete all user data” with either Volume button and select with Power. Your device should now restart normally.
Hardware Troubleshooting
Hardware Troubleshooting is figuring out and fixing issues with the physical parts of a computer or other gadget. This could be the power supply, wires, drives, etc. It could be a simple thing like unplugging and reconnecting hardware connections. Or, more advanced steps like swapping out parts or updating firmware.
If your Samsung tablet won’t boot up, it may be a hardware issue. Like failing DDR memory, corrupt BIOS settings, faulty power source connections, etc. To diagnose the problem and fix it, you should first find out which hardware part is the issue.
Using different troubleshooting techniques like
- voltage testing
- component replacement
are ways to repair the problem. Sometimes software problems can cause malfunctions, so it’s best to check with Samsung help to get an accurate diagnosis before fixing any physical bits yourself.
Check the power button
If your Samsung tablet gets stuck on the startup screen, check the power button. Don’t press it for too long. If it remains stuck, unplug any cables or chargers. Then, remove and re-insert the battery. Press and hold Volume Up + Power for 10 seconds. You’ll see a restart message.
If that doesn’t help, try a factory reset. Power off your device. Hold down Volume Up + Bixby + Power. Boot into recovery mode. Select “Factory Reset”.
Check the charging port
The first step if your Samsung tablet is stuck in Kid Mode is to check the charging port. If it’s plugged in while turned off, this could trigger Kid Mode. Unplug and plug the power cord back into your device to check.
If the battery is removable, try removing and reinserting it after 30 seconds. This could reset the tablet.
- Checking the charging port should be done first.
- If this doesn’t work, consider a replacement battery or software issues.
Check the battery
Having a problem with your Samsung tablet stuck on the startup screen? Check the battery level! Is your device completely drained? It might not start up properly. Press the power button for several seconds. This will show a pop-up window with your current battery level. Is it below 10%? Plug in your tablet and leave it overnight or until it is fully charged. After recharging, try booting up and see if it works this time.
Software Troubleshooting
Software troubleshooting is a form of problem-solving. Identify the problem, analyze it, and find the solution. It takes time.
When your Samsung tablet won’t start, take these steps:
- Hold down the power button for 10 seconds.
- Connect it to the charger for 15 minutes.
- Reset it from “Settings” > “Backup and Reset” > “Factory Reset” > “Reset Phone”.
- If these don’t work, contact Samsung technical support.
Check the operating system version
Troubleshooting a Samsung tablet that won’t start? Check it’s running the latest operating system (OS). This software ensures the tablet runs smoothly. To check the version, open Settings. Select “About Tablet” and note the version number. Outdated? Head to Samsung’s website for the latest one. Install the new version. Restart your device. Hopefully, this will fix the issue.
Check for software updates
Keep your Samsung tablet running smoothly by regularly updating its software. Head to the Settings menu, select “System” and then “Software Update.” If an update is needed, follow the instructions to download and install it. Updating can fix tiny bugs, boost stability and performance, and get rid of any problems that might be causing your tablet to hang on the startup screen.
Also, you can choose to have software updates installed automatically, so your tablet always has the latest version of its operating system.
Check for malware
Malware can be why your Samsung tablet is stuck on the startup screen. Malware is bad software that wants to damage or disable your computer or device.
- Run anti-malware software to check for it.
- Use a web-based tool to scan for malicious links or websites.
- After you find the malware, uninstall it and restart the device.
Now it will work again!
Professional Repair
When your Samsung tablet won’t start, expert repair is the best choice. Normal steps, like restarting or troubleshooting, may not fix the issue. Professional repair services can identify hardware or software problems and replace parts if needed.
They also give software updates, reinstall operating systems, and configure settings for your device. Professional repair usually comes with a warranty and satisfaction guarantee. And, they have experience with specialized problems like data recovery and virus removals. For reliable service for your Samsung tablet, go with professional repair!
Contact Samsung customer service
Stuck on the Samsung tablet startup screen? Contact Samsung customer service! They offer technical advice, warranty info and other support services. Maybe they can help you troubleshoot without needing to send the tablet in for repair.
Downloading a new ad-blocker app might help too – try the same one or a different one.
Visit a local repair shop
If your Samsung tablet is stuck on the startup screen, and you’ve tried all the fixes, it’s time to visit a repair shop. These shops specialize in electronic repairs.
Before you take your tablet in, back up your documents and apps. Use either cloud storage or do it yourself. Then, take your tablet to the repair shop. Describe the problem in detail, so they can accurately diagnose the cause.
Send the tablet to Samsung for repair
When your Samsung tablet won’t start, it’s a pain. If the steps above don’t work, you may need to send it in for repairs.
Send it to Samsung if:
- It still has problems after factory reset.
- It has physical or liquid damage.
- You don’t know what’s wrong.
Remember that repairs can take time and cost money. Before sending your tech in, back up all important data and info. Certain repairs may cause data loss.
FAQs about: Why Is My Samsung Tablet Stuck On The Startup Screen
Q1: What can I do if my Samsung tablet is stuck on the startup screen?
A1: If your Samsung tablet is stuck on the startup screen, you can try to reset it by pressing and holding the power button for 10-15 seconds. If that doesn’t work you might need to contact Samsung for further assistance.
Q2: How can I tell if my Samsung tablet is stuck on the startup screen?
A2: If your Samsung tablet is stuck on the startup screen, you will likely notice that the tablet is not responding to any of your commands. The screen may also be frozen or unresponsive.
Q3: What can cause my Samsung tablet to get stuck on the startup screen?
A3: There are a few different things that can cause your Samsung tablet to get stuck on the startup screen. These may include a software glitch, a corrupt operating system, or a hardware issue.